Power Keeps Going Out in One Room? What Could Be Wrong?
Imagine you're working in your home office when the computer suddenly shuts down. The lights go out, the power points stop working, but everything in the kitchen and living room is still running normally.
When the power disappears from just one room or part of your home, it can be confusing. Is there a problem with the switchboard? Has an appliance caused a fault? Or could there be an issue with the electrical wiring?
For Perth homeowners, a partial power outage can have several possible causes. Understanding the warning signs can help you make a few safe observations and recognise when it's time to call a licensed electrician.
Why Would Only One Room Lose Power?
Most homes have multiple electrical circuits rather than one circuit supplying the entire property.
Lighting, power points, air conditioning and other equipment may be connected to different circuits, depending on the age and design of the installation.
This means an electrical fault can interrupt power to one area while other parts of the home continue operating normally.
Importantly, electrical circuits don't always follow room boundaries. A single circuit may supply power points in several rooms, while the lighting and power points in one room may be supplied by different circuits.
The location of the outage can provide clues, but it doesn't necessarily identify the faulty circuit.
1. A Tripped Circuit Breaker
One of the most common explanations for a partial power outage is a circuit breaker that has operated.
Circuit breakers protect electrical wiring against excessive current and short circuits. When a fault or overload occurs, the breaker can disconnect the affected circuit.
You might notice that the power points in one area have stopped working while the lights remain on, or vice versa.
What you can do: If it's safe, visually inspect your switchboard for a breaker that has moved to the OFF or tripped position.
Don't remove switchboard covers or touch exposed wiring. If a breaker repeatedly trips, leave it off and arrange an inspection by a licensed electrician.
2. Too Many Appliances on One Circuit
Plugging several high-powered appliances into outlets supplied by the same circuit can place excessive demand on the wiring.
Portable heaters, kettles, air fryers and other heating appliances can draw substantial amounts of electricity.
Although these appliances may be plugged into different power points, they could still be sharing the same electrical circuit.
If the total demand exceeds the circuit's capacity, the protective breaker may trip.
What you can do: Avoid running multiple high-powered appliances from the same power board or extension lead.
If a circuit regularly trips during normal household use, an electrician can assess the circuit capacity, electrical load and whether improvements are required.
3. A Faulty Power Point or Electrical Connection
Sometimes the problem is limited to one power point rather than an entire room.
A damaged outlet, deteriorating connection or internal wiring fault may prevent electricity from reaching connected equipment.
Possible warning signs include:
-
A power point that stops working intermittently.
-
Crackling or buzzing sounds.
-
Discolouration around the outlet.
-
A plug or socket that feels unusually hot.
-
A burning smell.
What you can do: Stop using any outlet showing these symptoms.
Do not remove the faceplate, attempt to tighten electrical connections or investigate wiring behind the wall. These tasks require a licensed electrician.
4. Damaged or Deteriorating Wiring
Electrical wiring can be affected by age, physical damage, moisture, pests or previous renovation work.
A damaged cable or loose connection may cause intermittent power loss, particularly if the fault is affected by heat, vibration or electrical load.
In some cases, power may disappear and return unexpectedly.
This should never be treated as normal behaviour.
What you can do: Keep a record of when the problem occurs and which equipment is affected. If power cuts in and out without an obvious explanation, arrange professional fault finding.
Do not continue using electrical equipment that appears to be affected by an unsafe or unreliable connection.
5. A Faulty Appliance Causing a Circuit Problem
Sometimes a partial power outage begins when a particular appliance is switched on.
For example, a faulty heater, washing machine or kitchen appliance may trigger a protective device and disconnect power to the circuit.
The appliance itself may be responsible, rather than the fixed wiring.
What you can do: If it is safe to do so, switch off and unplug accessible appliances that may have been operating when the outage occurred.
Do not handle appliances showing signs of damage, overheating or moisture.
If the same appliance repeatedly causes electrical protection to operate, stop using it and arrange an appropriate inspection.
6. A Problem at the Switchboard
Not every partial power outage is caused by an appliance or an individual power point.
Faults involving protective devices, circuit connections or other switchboard components can interrupt power to parts of a home.
An older switchboard may also have limitations that become more noticeable as household electricity demand increases.
What you can do: Leave switchboard testing and repairs to a licensed electrician.
A professional can identify whether the problem involves a circuit breaker, wiring connection, protective device or another component.
7. An External Power Supply Problem
Occasionally, a partial power outage may be related to the incoming electricity supply rather than a fault within a particular room.
For example, some properties with three-phase power can experience problems affecting equipment connected to one phase.
This may cause power loss across seemingly unrelated areas of the property.
What you can do: If multiple unrelated circuits have lost power, particularly if lights are unusually bright or dim or appliances are behaving abnormally, stop using affected equipment and seek urgent assistance.
Where an external supply fault is suspected, the electricity network operator may need to investigate.
In the Perth metropolitan area, Western Power manages the electricity distribution network.
What Should You Check Before Calling an Electrician?
If there are no signs of immediate danger, a few basic observations can help explain the problem.
-
Check which areas are affected. Are the lights out, the power points, or both?
-
Look at the switchboard. Without opening any covers, check whether a circuit breaker or safety switch appears to have tripped.
-
Think about what was operating. Did the outage happen when a heater, appliance or air conditioner started?
-
Check whether neighbouring properties are affected. This may help identify a wider supply interruption.
-
Record any unusual symptoms. Buzzing, burning smells, flickering lights or intermittent power should be reported to your electrician.
Avoid repeatedly resetting protective devices or experimenting with electrical equipment to reproduce the fault.
If there is smoke, sparking, a burning smell, exposed wiring or signs of overheating, keep clear and seek urgent assistance.
When Is a Partial Power Outage an Emergency?
A power outage affecting one room isn't always an emergency, but certain symptoms require prompt attention.
Contact an emergency electrician if:
-
You notice smoke, sparking or a burning smell.
-
Power points or switches are hot, damaged or discoloured.
-
Lights become unusually bright or dim.
-
Power repeatedly disappears and returns.
-
Water has affected electrical equipment or wiring.
-
You suspect damaged wiring or an unsafe electrical connection.
If a dangerous external supply fault is suspected, contact Western Power. For immediate danger to life, call 000.
Why Professional Electrical Fault Finding Matters
Electrical faults can be difficult to diagnose from symptoms alone.
Two rooms losing power at the same time doesn't necessarily mean the fault is located in either room. Similarly, an appliance stopping unexpectedly doesn't always mean the appliance itself is defective.
A licensed electrician can carry out appropriate testing to identify the affected circuit, assess protective devices and locate faults in the electrical installation.
Correct diagnosis helps avoid unnecessary replacement of equipment and ensures the underlying problem is properly addressed.
Electrical Power Problems in Perth? Contact SMEC
Whether you've lost power to one room, several power points have stopped working or a circuit keeps cutting out, electrical faults should be investigated rather than ignored.
Steven Murphy Electrical Contractors provides electrical fault finding, repairs and emergency electrical services across Perth.
If you're experiencing unexplained power interruptions, visit our Emergency Electrical Services page or contact our team to arrange assistance.
For urgent electrical problems, call (08) 9381 7711.
