Air Conditioner Not Cooling Properly? Common Problems Before Perth's Summer

When Perth's summer temperatures begin to climb, a reliable air conditioner quickly becomes one of the most important appliances in the home. But what happens when your system is running, the fan is blowing, and the room simply isn't getting any cooler?

An air conditioner that isn't cooling properly doesn't necessarily need replacing. Sometimes the cause is something straightforward, such as an incorrect thermostat setting or a blocked filter. In other cases, the problem may involve electrical components, refrigerant issues or a fault that requires professional attention.

Here are eight common reasons your air conditioner might not be performing as it should.

1. Dirty or Blocked Air Filters

Air conditioners rely on a steady flow of air to operate efficiently. When filters become clogged with dust, pet hair and other airborne particles, airflow can be restricted, making it harder for the system to cool your home.

Dirty filters can also place unnecessary strain on the equipment.

What you can do: Check the manufacturer's instructions for cleaning or replacing accessible filters. For many split systems, regular filter cleaning is a simple maintenance task that can make a noticeable difference.

2. Incorrect Thermostat Settings

It sounds obvious, but thermostat settings are worth checking before assuming something has gone wrong.

Your air conditioner may be set to fan-only mode rather than cooling, or the selected temperature may be too close to the current room temperature.

What you can do: Confirm the system is set to cooling mode, usually indicated by a snowflake symbol, and select a temperature below the current room temperature. Allow the unit sufficient time to respond.

3. Restricted Airflow Around the Outdoor Unit

The outdoor unit needs adequate airflow to release heat removed from inside your home.

Leaves, garden debris, overgrown plants and objects placed too close to the unit can interfere with its operation. This can become particularly noticeable during prolonged periods of hot weather.

What you can do: With the unit switched off, visually inspect the surrounding area and remove loose debris where it is safe to do so. Maintain the clearances recommended by the manufacturer.

Avoid opening the unit, touching electrical components or attempting to clean internal parts yourself.

4. Perth's Extreme Summer Heat

During very hot weather, an air conditioner may struggle to maintain the temperature you have selected, particularly if the system is undersized for the room or the home receives significant afternoon sun.

Poor insulation, large west-facing windows and frequent opening of external doors can increase the cooling load.

What you can do: Close blinds during the hottest part of the day, keep doors and windows closed while cooling, and use ceiling fans to help circulate conditioned air.

If the system consistently struggles even under moderate conditions, a professional assessment may be worthwhile.

5. Refrigerant Leaks or Cooling System Faults

Refrigerant is essential to the cooling process. If a system develops a leak or another fault within its refrigeration circuit, its cooling performance may deteriorate.

Possible signs include reduced cooling, ice forming on parts of the system or unusual operating behaviour.

Refrigerant does not normally need routine topping up in a correctly functioning sealed system. A low refrigerant charge can indicate a leak that needs investigation.

What you can do: Arrange an inspection by an appropriately licensed air-conditioning technician. Refrigerant handling and repairs should never be attempted as a DIY task.

6. Electrical or Control Problems

Air-conditioning systems contain electrical components that control the compressor, fans and other operating functions.

Faulty connections, damaged components, control-board problems or power supply issues can prevent the system from cooling correctly, even when some parts appear to be operating.

Warning signs can include intermittent operation, unusual noises, error codes or repeated circuit-breaker trips.

What you can do: Check the user manual for any displayed error code. If a breaker repeatedly trips, leave the affected circuit off and arrange professional assistance. Do not repeatedly reset it or attempt electrical repairs yourself.

7. A System That Needs Professional Maintenance

Over time, dirt can accumulate on heat-exchange surfaces, drainage components can become obstructed, and mechanical or electrical parts can deteriorate.

Even a system that still runs may gradually lose performance if underlying maintenance issues are left unresolved.

A professional inspection can help identify problems before they develop into more expensive repairs or a complete breakdown during summer.

8. An Ageing or Incorrectly Sized Air Conditioner

Sometimes poor cooling is not caused by one isolated fault.

An older air conditioner may no longer operate as effectively as it once did. Alternatively, the system may have been incorrectly sized for the space, particularly if renovations or changes to the home's layout have increased the cooling requirements.

In these situations, repeated repairs may not always be the most economical long-term solution.

A qualified professional can assess whether servicing, repair or replacement is the most appropriate option.

When Should You Call a Professional?

Some basic checks are safe for homeowners, but electrical and refrigeration faults require specialist attention.

Consider arranging an inspection if:

  • The air conditioner runs but produces little or no cooling.

  • The system repeatedly trips a circuit breaker.

  • You notice unusual noises, burning smells or persistent error codes.

  • Ice forms on the system or cooling performance continues to deteriorate.

  • The unit frequently switches off unexpectedly.

  • Cleaning accessible filters and checking the settings haven't improved performance.

If you notice a burning smell, smoke or signs of electrical damage, switch the system off if safe to do so and seek professional assistance.

Get Your Air Conditioning Ready for Perth's Summer

The best time to investigate air-conditioning problems is before Perth's hottest weather arrives.

Whether your system is struggling to cool, behaving unpredictably or showing signs of an electrical fault, addressing the issue early can help avoid an inconvenient breakdown when you need cooling most.

Steven Murphy Electrical Contractors provides electrical services across Perth, including air-conditioning-related services.

For assistance with your system, visit our Air Conditioning Service & Repairs page or contact our team to discuss your requirements.